Structurally robust lithium-rich layered oxides for high-energy and long-lasting cathodes.

O2-type lithium-rich layered oxides, known for mitigating irreversible transition metal migration and voltage decay, provide suitable framework for exploring the inherent properties of oxygen redox. Here, we present a series of O2-type lithium-rich layered oxides exhibiting minimal structural disordering and stable voltage retention even with high anionic redox participation based on the nominal composition. Notably, we observe a distinct asymmetric lattice breathing phenomenon within the layered framework driven by excessive oxygen redox, which includes substantial particle-level mechanical stress and the microcracks formation during cycling. This chemo-mechanical degradation can be effectively mitigated by balancing the anionic and cationic redox capabilities, securing both high discharge voltage (~ 3.43 V vs. Li/Li+) and capacity (~ 200 mAh g-1) over extended cycles. The observed correlation between the oxygen redox capability and the structural evolution of the layered framework suggests the distinct intrinsic capacity fading mechanism that differs from the previously proposed voltage fading mode.

In situ multiscale probing of the synthesis of a Ni-rich layered oxide cathode reveals reaction heterogeneity driven by competing kinetic pathways.

Nickel-rich layered oxides are envisaged as key near-future cathode materials for high-energy lithium-ion batteries. However, their practical application has been hindered by their inferior cycle stability, which originates from chemo-mechanical failures. Here we probe the solid-state synthesis of LiNi0.6Co0.2Mn0.2O2 in real time to better understand the structural and/or morphological changes during phase evolution. Multi-length-scale observations-using aberration-corrected transmission electron microscopy, in situ heating transmission electron microscopy and in situ X-ray diffraction-reveal that the overall synthesis is governed by the kinetic competition between the intrinsic thermal decomposition of the precursor at the core and the topotactic lithiation near the interface, which results in spatially heterogeneous intermediates. The thermal decomposition leads to the formation of intergranular voids and intragranular nanopores that are detrimental to cycling stability. Furthermore, we demonstrate that promoting topotactic lithiation during synthesis can mitigate the generation of defective structures and effectively suppress the chemo-mechanical failures.

Coupling structural evolution and oxygen-redox electrochemistry in layered transition metal oxides.

Lattice oxygen redox offers an unexplored way to access superior electrochemical properties of transition metal oxides (TMOs) for rechargeable batteries. However, the reaction is often accompanied by unfavourable structural transformations and persistent electrochemical degradation, thereby precluding the practical application of this strategy. Here we explore the close interplay between the local structural change and oxygen electrochemistry during short- and long-term battery operation for layered TMOs. The substantially distinct evolution of the oxygen-redox activity and reversibility are demonstrated to stem from the different cation-migration mechanisms during the dynamic de/intercalation process. We show that the π stabilization on the oxygen oxidation initially aids in the reversibility of the oxygen redox and is predominant in the absence of cation migrations; however, the π-interacting oxygen is gradually replaced by σ-interacting oxygen that triggers the formation of O-O dimers and structural destabilization as cycling progresses. More importantly, it is revealed that the distinct cation-migration paths available in the layered TMOs govern the conversion kinetics from π to σ interactions. These findings constitute a step forward in unravelling the correlation between the local structural evolution and the reversibility of oxygen electrochemistry and provide guidance for further development of oxygen-redox layered electrode materials.

Permselective metal-organic framework gel membrane enables long-life cycling of rechargeable organic batteries.

Rechargeable organic batteries show great potential as a low-cost, sustainable and mass-producible alternatives to current transition-metal-based cells; however, serious electrode dissolution issues and solubilization of organic redox intermediates (shuttle effect) have plagued the capacity retention and cyclability of these cells. Here we report on the use of a metal-organic framework (MOF) gel membrane as a separator for organic batteries. The homogeneous micropores, intrinsic of the MOF-gel separator, act as permselective channels for targeted organic intermediates, thereby mitigating the shuttling problem without sacrificing power. A battery using a MOF-gel separator and 5,5'-dimethyl-2,2'-bis-p-benzoquinone (Me2BBQ) as the electrode displays high cycle stability with capacity retention of 82.9% after 2,000 cycles, corresponding to a capacity decay of ~0.008% per cycle, with a discharge capacity of ~171 mA h g-1 at a current density of 300 mA g-1. The molecular and ionic sieving capabilities of MOF-gel separators promise general applicability, as pore size can be tuned to specific organic electrode materials. The use of MOF-gel separators to prevent side reactions of soluble organic redox intermediates could lead to the development of rechargeable organic batteries with high energy density and long cycling life.

Controlling Residual Lithium in High-Nickel (>90 %) Lithium Layered Oxides for Cathodes in Lithium-Ion Batteries.

The rampant generation of lithium hydroxide and carbonate impurities, commonly known as residual lithium, is a practical obstacle to the mass-scale synthesis and handling of high-nickel (>90 %) layered oxides and their use as high-energy-density cathodes for lithium-ion batteries. Herein, we suggest a simple in situ method to control the residual lithium chemistry of a high-nickel lithium layered oxide, Li(Ni0.91 Co0.06 Mn0.03 )O2 (NCM9163), with minimal side effects. Based on thermodynamic considerations of the preferred reactions, we systematically designed a synthesis process that preemptively converts residual Li2 O (the origin of LiOH and Li2 CO3 ) into a more stable compound by injecting reactive SO2 gas. The preformed lithium sulfate thin film significantly suppresses the generation of LiOH and Li2 CO3 during both synthesis and storage, thereby mitigating slurry gelation and gas evolution and improving the cycle stability.

Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes.

Despite the high energy density of lithium-rich layered-oxide electrodes, their real-world implementation in batteries is hindered by the substantial voltage decay on cycling. This voltage decay is widely accepted to mainly originate from progressive structural rearrangements involving irreversible transition-metal migration. As prevention of this spontaneous cation migration has proven difficult, a paradigm shift toward management of its reversibility is needed. Herein, we demonstrate that the reversibility of the cation migration of lithium-rich nickel manganese oxides can be remarkably improved by altering the oxygen stacking sequences in the layered structure and thereby dramatically reducing the voltage decay. The preeminent intra-cycle reversibility of the cation migration is experimentally visualized, and first-principles calculations reveal that an O2-type structure restricts the movements of transition metals within the Li layer, which effectively streamlines the returning migration path of the transition metals. Furthermore, we propose that the enhanced reversibility mitigates the asymmetry of the anionic redox in conventional lithium-rich electrodes, promoting the high-potential anionic reduction, thereby reducing the subsequent voltage hysteresis. Our findings demonstrate that regulating the reversibility of the cation migration is a practical strategy to reduce voltage decay and hysteresis in lithium-rich layered materials.

Anchored Mediator Enabling Shuttle-Free Redox Mediation in Lithium-Oxygen Batteries.

Redox mediators (RMs) are considered an effective countermeasure to reduce the large polarization in lithium-oxygen batteries. Nevertheless, achieving sufficient enhancement of the cyclability is limited by the trade-offs of freely mobile RMs, which are beneficial for charge transport but also trigger the shuttling phenomenon. Here, we successfully decoupled the charge-carrying redox property of RMs and shuttling phenomenon by anchoring the RMs in polymer form, where physical RM migration was replaced by charge transfer along polymer chains. Using PTMA (poly(2,2,6,6-tetramethyl-1-piperidinyloxy-4-yl methacrylate)) as a polymer model system based on the well-known RM tetramethylpiperidinyloxyl (TEMPO), it is demonstrated that PTMA can function as stationary RM, preserving the redox activity of TEMPO. The efficiency of RM-mediated Li2 O2 decomposition remains remarkably stable without the consumption of oxidized RMs or degradation of the lithium anode, resulting in an improved performance of the lithium-oxygen cell.

Stable and High-Power Calcium-Ion Batteries Enabled by Calcium Intercalation into Graphite.

Calcium-ion batteries (CIBs) are considered to be promising next-generation energy storage systems because of the natural abundance of calcium and the multivalent calcium ions with low redox potential close to that of lithium. However, the practical realization of high-energy and high-power CIBs is elusive owing to the lack of suitable electrodes and the sluggish diffusion of calcium ions in most intercalation hosts. Herein, it is demonstrated that calcium-ion intercalation can be remarkably fast and reversible in natural graphite, constituting the first step toward the realization of high-power calcium electrodes. It is shown that a graphite electrode exhibits an exceptionally high rate capability up to 2 A g-1 , delivering ≈75% of the specific capacity at 50 mA g-1 with full calcium intercalation in graphite corresponding to ≈97 mAh g-1 . Moreover, the capacity stably maintains over 200 cycles without notable cycle degradation. It is found that the calcium ions are intercalated into graphite galleries with a staging process. The intercalation mechanisms of the "calciated" graphite are elucidated using a suite of techniques including synchrotron in situ X-ray diffraction, nuclear magnetic resonance, and first-principles calculations. The versatile intercalation chemistry of graphite observed here is expected to spur the development of high-power CIBs.

Carbon monoxide ameliorates acetaminophen-induced liver injury by increasing hepatic HO-1 and Parkin expression.

Acetaminophen (APAP) is widely used as an antifebrile and analgesic drug at recommended doses, whereas an overdose of APAP can cause severe liver damage. The molecular mechanisms underlying APAP-induced liver damage remain incompletely understood. Carbon monoxide (CO), an end-product of heme oxygenase (HO)-1 activity, can confer anti-inflammatory and antiapoptotic properties in cellular models of toxicity via regulation of mitochondrial function. The objective of this study was to evaluate the effects of CO on APAP-induced hepatotoxicity and CO's relationship to regulation of endoplasmic reticulum (ER) stress and mitochondrial signaling using CO-releasing molecules or low concentrations of CO applied as pretreatment or posttreatment. Using genetic deletion or knockdown approaches in alpha mouse liver cells or primary hepatocytes, respectively, we investigated the role of HO-1 and the mitophagy regulator protein Parkin on APAP-induced expression of the ER stress-associated apoptosis regulator cytosine-cytosine-adenosine-adenosine-thymidine (CCAAT)/enhancer-binding protein homologous protein (CHOP). We found that CO induced Parkin expression in hepatocytes via the protein kinase RNA-like ER kinase/eukaryotic translation initiation factor 2-α/activating transcription factor-4 signaling pathway. Additionally, CO gas inhalation significantly alleviated APAP-induced liver damage in vivo and correspondingly reduced serum alanine aminotransferase and aspartate aminotransferase levels as well as proinflammatory cytokines and reduced the expression of CHOP in liver tissues while dramatically increasing hepatic HO-1 and Parkin expression. We found that the protective effects of CO on APAP-induced liver damage were mediated by down-regulation of CHOP at a transcriptional and post-translational level via induction of HO-1 and Parkin, respectively, and associated with decreases in reactive oxygen species production and JNK phosphorylation. We conclude that CO may represent a promising therapeutic agent for APAP-induced liver injury.-Chen, Y., Park, H.-J., Park, J., Song, H.-C., Ryter, S. W., Surh, Y.-J., Kim, U.-H., Joe, Y., Chung, H. T. Carbon monoxide ameliorates acetaminophen-induced liver injury by increasing hepatic HO-1 and Parkin expression.

Biological Nicotinamide Cofactor as a Redox-Active Motif for Reversible Electrochemical Energy Storage.

Nicotinamide adenine dinucleotide (NAD+ ) is one of the most well-known redox cofactors carrying electrons. Now, it is reported that the intrinsically charged NAD+ motif can serve as an active electrode in electrochemical lithium cells. By anchoring the NAD+ motif by the anion incorporation, redox activity of the NAD+ is successfully implemented in conventional batteries, exhibiting the average voltage of 2.3 V. The operating voltage and capacity are tunable by altering the anchoring anion species without modifying the redox center itself. This work not only demonstrates the redox capability of NAD+ , but also suggests that anchoring the charged molecules with anion incorporation is a viable new approach to exploit various charged biological cofactors in rechargeable battery systems.

Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries.

Co-intercalation reactions make graphite as promising anodes for sodium ion batteries, however, the high redox potentials significantly lower the energy density. Herein, we investigate the factors that influence the co-intercalation potential of graphite and find that the tuning of the voltage as large as 0.38 V is achievable by adjusting the relative stability of ternary graphite intercalation compounds and the solvent activity in electrolytes. The feasibility of graphite anode in sodium ion batteries is confirmed in conjunction with Na1.5VPO4.8F0.7 cathodes by using the optimal electrolyte. The sodium ion battery delivers an improved voltage of 3.1 V, a high power density of 3863 W kg-1both electrodes, negligible temperature dependency of energy/power densities and an extremely low capacity fading rate of 0.007% per cycle over 1000 cycles, which are among the best thus far reported for sodium ion full cells, making it a competitive choice in large-scale energy storage systems.

Direct Observation of Redox Mediator-Assisted Solution-Phase Discharging of Li-O2 Battery by Liquid-Phase Transmission Electron Microscopy.

Li-O2 battery is one of the important next-generation energy storage systems, as it can potentially offer the highest theoretical energy density among battery chemistries reported thus far. However, realization of its high discharge capacity still remains challenging and is hampered by the nature of how the discharge products are formed, causing premature passivation of the air electrode. Redox mediators are exploited to solve this problem, as they can promote the charge transfer from electrodes to the solution phase. The mechanistic understanding of the fundamental electrochemical reaction involving the redox mediators would aid in the further development of Li-O2 batteries along with rational design of new redox mediators. Herein, we attempt to monitor the discharge reaction of a Li-O2 battery in real time by liquid-phase transmission electron microscopy (TEM). Direct in situ TEM observation reveals the gradual growth of toroidal Li2O2 discharge product in the electrolyte with the redox mediator upon discharge. Moreover, quantitative analyses of the growth profiles elucidate that the growth mechanism involves two steps: dominant lateral growth of Li2O2 into disclike structures in the early stage followed by vertical growth with morphology transformation into a toroidal structure.

FGF21 induced by carbon monoxide mediates metabolic homeostasis via the PERK/ATF4 pathway.

The prevalence of metabolic diseases, including type 2 diabetes, obesity, and cardiovascular disease, has rapidly increased, yet the molecular mechanisms underlying the metabolic syndrome, a primary risk factor, remain incompletely understood. The small, gaseous molecule carbon monoxide (CO) has well-known anti-inflammatory, antiproliferative, and antiapoptotic effects in a variety of cellular- and tissue-injury models, whereas its potential effects on the complex pathways of metabolic disease remain unknown. We demonstrate here that CO can alleviate metabolic dysfunction in vivo and in vitro. We show that CO increased the expression and section of the fibroblast growth factor 21 (FGF21) in hepatocytes and liver. CO-stimulated PERK activation and enhanced the levels of FGF21 via the eIF2α-ATF4 signaling pathway. The induction of FGF21 by CO attenuated endoreticulum stress- or diet-induced, obesity-dependent hepatic steatosis. Moreover, CO inhalation lowered blood glucose levels, enhanced insulin sensitivity, and promoted energy expenditure by stimulating the emergence of beige adipose cells from white adipose cells. In conclusion, we suggest that CO acts as a potent inducer of FGF21 expression and that CO critically depends on FGF21 to regulate metabolic homeostasis.-Joe, Y., Kim, S., Kim, H. J., Park, J., Chen, Y., Park, H.-J., Jekal, S.-J., Ryter, S. W., Kim, U. H., Chung, H. T. FGF21 induced by carbon monoxide mediates metabolic homeostasis via the PERK/ATF4 pathway.

Roll-to-Roll Laser-Printed Graphene-Graphitic Carbon Electrodes for High-Performance Supercapacitors.

Carbon electrodes including graphene and thin graphite films have been utilized for various energy and sensor applications, where the patterning of electrodes is essentially included. Laser scribing in a DVD writer and inkjet printing were used to pattern the graphene-like materials, but the size and speed of fabrication has been limited for practical applications. In this work, we devise a simple strategy to use conventional laser-printer toner materials as precursors for graphitic carbon electrodes. The toner was laser-printed on metal foils, followed by thermal annealing in hydrogen environment, finally resulting in the patterned thin graphitic carbon or graphene electrodes for supercapacitors. The electrochemical cells made of the graphene-graphitic carbon electrodes show remarkably higher energy and power performance compared to conventional supercapacitors. Furthermore, considering the simplicity and scalability of roll-to-roll (R2R) electrode patterning processes, the proposed method would enable cheaper and larger-scale synthesis and patterning of graphene-graphitic carbon electrodes for various energy applications in the future.

Pterostilbene 4'-ß-Glucoside Protects against DSS-Induced Colitis via Induction of Tristetraprolin.

Pterostilbene, a dimethyl ester analog of resveratrol, has anti-inflammatory and antioxidative effects and alters cell proliferation. Tristetraprolin (TTP) promotes the degradation of proinflammatory mediators via binding to adenosine and uridine- (AU-) rich elements (ARE) located in the 3'-untranslated regions of mRNAs. Here, we utilized pterostilbene 4'-ß-glucoside (4-PG), a compound derived from pterostilbene, to investigate whether it has anti-inflammatory effects on dextran sulfate sodium- (DSS-) induced colitis via TTP enhancement. TTP expression was increased in 4-PG dose- and time-dependent manners in RAW264.7 cells. The production of proinflammatory cytokine, such as TNF-α, was reduced by 4-PG in vitro. To investigate the role of TTP in the anti-inflammatory effects of 4-PG, we used DSS-induced colitis in TTP WT and KO mice as models. The expression levels of TTP and proinflammatory cytokines were determined in serum and colon tissue. 4-PG increased the expression of TTP while suppressing proinflammatory cytokines both in vitro and in vivo. These findings suggest that treatment with 4-PG mediates the anti-inflammatory effects of 4-PG on DSS-induced colitis via enhancing TTP expression.

High-efficiency and high-power rechargeable lithium-sulfur dioxide batteries exploiting conventional carbonate-based electrolytes.

Shedding new light on conventional batteries sometimes inspires a chemistry adoptable for rechargeable batteries. Recently, the primary lithium-sulfur dioxide battery, which offers a high energy density and long shelf-life, is successfully renewed as a promising rechargeable system exhibiting small polarization and good reversibility. Here, we demonstrate for the first time that reversible operation of the lithium-sulfur dioxide battery is also possible by exploiting conventional carbonate-based electrolytes. Theoretical and experimental studies reveal that the sulfur dioxide electrochemistry is highly stable in carbonate-based electrolytes, enabling the reversible formation of lithium dithionite. The use of the carbonate-based electrolyte leads to a remarkable enhancement of power and reversibility; furthermore, the optimized lithium-sulfur dioxide battery with catalysts achieves outstanding cycle stability for over 450 cycles with 0.2 V polarization. This study highlights the potential promise of lithium-sulfur dioxide chemistry along with the viability of conventional carbonate-based electrolytes in metal-gas rechargeable systems.

Reaction chemistry in rechargeable Li-O2 batteries.

The seemingly simple reaction of Li-O2 batteries involving lithium and oxygen makes this chemistry attractive for high-energy-density storage systems; however, achieving this reaction in practical rechargeable Li-O2 batteries has proven difficult. The reaction paths leading to the final Li2O2 discharge products can be greatly affected by the operating conditions or environment, which often results in major side reactions. Recent research findings have begun to reveal how the reaction paths may be affected by the surrounding conditions and to uncover the factors contributing to the difficulty in achieving the reactions of lithium and oxygen. This progress report describes the current state of understanding of the electrode reaction mechanisms in Li-O2 batteries; the factors that affect reaction pathways; and the effect of cell components such as solvents, salts, additives, and catalysts on the discharge product and its decomposition during charging. This comprehensive review of the recent progress in understanding the reaction chemistry of the Li-O2 system will serve as guidelines for future research and aid in the development of reliable high-energy-density rechargeable Li-O2 batteries.

Dissolution and ionization of sodium superoxide in sodium-oxygen batteries.

With the demand for high-energy-storage devices, the rechargeable metal-oxygen battery has attracted attention recently. Sodium-oxygen batteries have been regarded as the most promising candidates because of their lower-charge overpotential compared with that of lithium-oxygen system. However, conflicting observations with different discharge products have inhibited the understanding of precise reactions in the battery. Here we demonstrate that the competition between the electrochemical and chemical reactions in sodium-oxygen batteries leads to the dissolution and ionization of sodium superoxide, liberating superoxide anion and triggering the formation of sodium peroxide dihydrate (Na2O2·2H2O). On the formation of Na2O2·2H2O, the charge overpotential of sodium-oxygen cells significantly increases. This verification addresses the origin of conflicting discharge products and overpotentials observed in sodium-oxygen systems. Our proposed model provides guidelines to help direct the reactions in sodium-oxygen batteries to achieve high efficiency and rechargeability.

A New Perspective on Li-SO2 Batteries for Rechargeable Systems.

Primary Li-SO2 batteries offer a high energy density in a wide operating temperature range with exceptionally long shelf life and have thus been frequently used in military and aerospace applications. Although these batteries have never been demonstrated as a rechargeable system, herein, we show that the reversible formation of Li2S2O4, the major discharge product of Li-SO2 battery, is possible with a remarkably smaller charging polarization than that of a Li-O2 battery without the use of catalysts. The rechargeable Li-SO2 battery can deliver approximately 5400 mAh g(-1) at 3.1 V, which is slightly higher than the performance of a Li-O2 battery. In addition, the Li-SO2 battery can be operated with the aid of a redox mediator, exhibiting an overall polarization of less than 0.3 V, which results in one of the highest energy efficiencies achieved for Li-gas battery systems.